|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
am5 construction contact arrangement miniature switches with high precision am5 (qv) switches 27.8 15.9 10.3 standard type contact gap is 1mm. please consult us if you need more than 1mm contact gap. compliance with rohs directive features ?high precision as a result of designing ideal spring by using computer analysis o.p. 14.7 0.4mm ?reliable design with shock resistance min. 980 m/s 2 ?high inrush resistance 160a ?wide variety of contact ratings and terminal types ?ul/c-ul, enec/vde approved typical application ?home appliances ?vending machines ?amusement and communication equipment ?copies ?general industrial machines 1. silver alloy contact 2. gold clad contact com no nc all rights rese r v ed ? c opyright panasonic elect r ic w o r k s co., ltd.
am5 operation force chart 7th digit of part number/actuator operation force, max. by actuator 34567 pin plunger 0.49n 0.98n 1.96n 2.94n 3.92n short hinge lever 0.59n 1.08n 2.16n 3.14n 4.12n hinge lever 0.29n 0.59n 1.18n 1.77n 2.35n long hinge lever 0.15n 0.29n 0.59n 0.88n 1.18n simulated roller lever 0.29n 0.59n 1.18n 1.77n 2.35n short roller lever 0.59n 1.08n 2.16n 3.14n 4.12n roller lever 0.29n 0.59n 1.18n 1.77n 2.35n terminals .187 quick-connect terminal .187 quick-connect/solder terminal bottom com terminal side com terminal dimensions .187 quick-connect terminal dimensions .187 quick-connect/solder terminal .250 quick-connect terminal bottom com terminal side com terminal dimensions c nc no 2 3 1 c nc no 2 3 1 6.35 3.2 1.55 dia. 6.4 4.75 1.2 r1.2 r0.8 6.35 3.2 6.4 4.75 c nc no 2 3 1 c nc no 2 3 1 6.35 8.05 2 4.15 1.65 dia. +0.1 0 +0.05 ?.07 0.15 +0.1 ?.05 all rights rese r v ed ? c opyright panasonic elect r ic w o r k s co., ltd. am5 ordering information 0.1a type 6a type 11a type 16a type type of switch am5: qv switch contact rating 00: 0.1 a (gold clad) te r minals 1: bottom com, spdt 2: bottom com, spst-nc 3: bottom com, spst-no 4: side com, spdt 5: side com, spst-nc 6: side com, spst-no actuators 0: pin plunger 1: short hinge lever 2: hinge lever 3: long hinge lever 4: simulated roller lever 5: short roller lever 6: roller lever te r minals .187 quick-connect/solder terminal .187 quick-connect terminal a: c: operating force by pin plunger (max.) 3: 0.49 n 4: 0.98 n 5: 1.96 n agency standard 3: ul/c-ul rated, enec/vde approved ex. am5 0 0 1 0 c 5 3 1. not every combination is available. please refer to the table, ?roduct types? 2. please refer to the standard chart regarding agency standard remarks: type of switch am5: qv switch contact rating 06: 6 a (silver alloy) te r minals 1: bottom com, spdt 2: bottom com, spst-nc 3: bottom com, spst-no 4: side com, spdt 5: side com, spst-nc 6: side com, spst-no actuators 0: pin plunger 1: short hinge lever 2: hinge lever 3: long hinge lever 4: simulated roller lever 5: short roller lever 6: roller lever te r minals .187 quick-connect/solder terminal .187 quick-connect terminal a: c: operating force by pin plunger (max.) 3: 0.49 n agency standard 3: ul/c-ul rated, enec/vde approved ex. am5 0 6 1 0 c 5 3 1. not every combination is available. please refer to the table, ?roduct types? 2. please refer to the standard chart regarding agency standard remarks: type of switch am5: qv switch contact rating 11: 11 a (silver alloy) te r minals 1: bottom com, spdt 2: bottom com, spst-nc 3: bottom com, spst-no 4: side com, spdt 5: side com, spst-nc 6: side com, spst-no actuators 0: pin plunger 1: short hinge lever 2: hinge lever 3: long hinge lever 4: simulated roller lever 5: short roller lever 6: roller lever te r minals .187 quick-connect/solder terminal .187 quick-connect terminal .250 quick-connect terminal a: c: d: operating force by pin plunger (max.) 4: 0.98 n agency standard 3: ul/c-ul rated, enec/ vde approved contact cadmium free n: ex. am5 1 1 1 0 c 4 3 n 1. not every combination is available. please refer to the table, ?roduct types? 2. please refer to the standard chart regarding agency standard remarks: type of switch am5: qv switch contact rating 16: 16 a (silver alloy) te r minals 1: bottom com, spdt 2: bottom com, spst-nc 3: bottom com, spst-no 4: side com, spdt 5: side com, spst-nc 6: side com, spst-no actuators 0: pin plunger 1: short hinge lever 2: hinge lever 3: long hinge lever 4: simulated roller lever 5: short roller lever 6: roller lever te r minals .187 quick-connect/solder terminal .187 quick-connect terminal .250 quick-connect terminal a: c: d: operating force by pin plunger (max.) 5: 1.96 n 6: 2.94 n 7: 3.92 n agency standard 3: ul/c-ul rated, enec/ vde approved contact cadmium free n: 1. not every combination is available. please refer to the table, ?roduct types? 2. please refer to the standard chart regarding agency standard remarks: ex. am5 1 6 1 0 c 5 3 n all rights rese r v ed ? c opyright panasonic elect r ic w o r k s co., ltd. am5 product types 0.1a type (gold clad contact) .187 quick-connect terminal 1) bottom com terminal 2-1) side com terminal actuator operating force, max. contact arrangement contact arrangement spdt spst-nc spst-no pin plunger 0.49n am50010c33 am50020c33 am50030c33 0.98n am50010c43 am50020c43 am50030c43 1.96n am50010c53 am50020c53 am50030c53 short hinge lever 0.59n am50011c33 am50021c33 am50031c33 1.08n am50011c43 am50021c43 am50031c43 2.16n am50011c53 am50021c53 am50031c53 hinge lever 0.29n am50012c33 am50022c33 am50032c33 0.59n am50012c43 am50022c43 am50032c43 1.18n am50012c53 am50022c53 am50032c53 long hinge lever 0.15n am50013c33 am50023c33 am50033c33 0.29n am50013c43 am50023c43 am50033c43 0.59n am50013c53 am50023c53 am50033c53 simulated roller lever 0.29n am50014c33 am50024c33 am50034c33 0.59n am50014c43 am50024c43 am50034c43 1.18n am50014c53 am50024c53 am50034c53 short roller lever 0.59n am50015c33 am50025c33 am50035c33 1.08n am50015c43 am50025c43 am50035c43 2.16n am50015c53 am50025c53 am50035c53 roller lever 0.29n am50016c33 am50026c33 am50036c33 0.59n am50016c43 am50026c43 am50036c43 1.18n am50016c53 am50026c53 am50036c53 actuator operating force, max. contact arrangement contact arrangement spdt spst-nc spst-no pin plunger 0.49n am50040c33 am50050c33 am50060c33 0.98n am50040c43 am50050c43 am50060c43 1.96n am50040c53 am50050c53 am50060c53 short hinge lever 0.59n am50041c33 am50051c33 am50061c33 1.08n am50041c43 am50051c43 am50061c43 2.16n am50041c53 am50051c53 am50061c53 hinge lever 0.29n am50042c33 am50052c33 am50062c33 0.59n am50042c43 am50052c43 am50062c43 1.18n am50042c53 am50052c53 am50062c53 long hinge lever 0.15n am50043c33 am50053c33 am50063c33 0.29n am50043c43 am50053c43 am50063c43 0.59n am50043c53 am50053c53 am50063c53 simulated roller lever 0.29n am50044c33 am50054c33 am50064c33 0.59n am50044c43 am50054c43 am50064c43 1.18n am50044c53 am50054c53 am50064c53 short roller lever 0.59n am50045c33 am50055c33 am50065c33 1.08n am50045c43 am50055c43 am50065c43 2.16n am50045c53 am50055c53 am50065c53 roller lever 0.29n am50046c33 am50056c33 am50066c33 0.59n am50046c43 am50056c43 am50066c43 1.18n am50046c53 am50056c53 am50066c53 all rights rese r v ed ? c opyright panasonic elect r ic w o r k s co., ltd. am5 6a type (silver alloy contact) .187 quick-connect terminal 1) bottom com terminal 2-1) side com terminal remarks: also .187 quick-connect/solder terminal is available. when ordering, change the eighth digit of part number c to a. am5 16a type (silver alloy contact) .187 quick-connect terminal 1) bottom com terminal 2-1) side com terminal remarks: 1. .187 quick-connect/solder terminal is available. when ordering, change the eighth digit of part number c to a. am5 specifications 1. contact rating remark: the inductive load for dc should have a time constant of 7 ms or less. 2. characteristics type voltage resistive load (cos=1) inductive load (cos nearly equal 0.6 to 0.7) gold clad contact 0.1a type 250v ac 0.1a 0.1a 125v ac 0.1a 0.1a 30v dc 0.1a 0.1a silver alloy contact 6a type 250v ac 6a 3a 125v ac 6a 3a 125v dc 0.5a 0.5a 11a type 250v ac 11a 6a 125v ac 11a 6a 125v dc 0.6a 0.6a 16a type 250v ac 16a 10a 125v ac 16a 10a 125v dc 0.6a 0.6a gold clad contact for low level circuit 6v dc 5ma 12v dc 2ma 24v dc 1ma type 16, 11, 6a type (silver alloy) 0.1a type (gold clad) expected life (min.) mechanical 10 7 operations (at 60 cpm) electrical 10 5 operations (at rated load 20 cpm) 10 5 operations (at rated load) 2 10 6 operations (at low-level circuit rating) insulation resistance 100m ? (at 500v dc) dielectric strength between terminals 1,000vrms for 1 min. between terminals and other exposed metal parts 2,000vrms for 1 min. between terminals and ground 2,000vrms for 1 min. contact resistance (initial) 50m ? (by voltage drop at 1a 6 to 8v dc) 50m ? (by voltage drop at 0.1a 6 to 8v dc) vibration resistance (by pin plunger) 10 to 55hz at simple amplitude of 0.75mm (contact opening: max. 1msec.) shock resistance (by pin plunger) (contact opening: max. 1msec.) o.f. 0.49n max. type min. 98m/s 2 o.f. 0.98n max. type min. 196m/s 2 o.f. 1.96n to 3.92n max. type min. 294m/s 2 o.f. 0.15n to 0.49n max. type min. 98m/s 2 o.f. 0.98n max. type min. 196m/s 2 o.f. 1.96n max. type min. 294m/s 2 allowable operating speed 0.1 to 1,000mm/sec. (at pin plunger) maximum operating cycle rate 600cpm ambient temperature ?5 to +105 c (not freezing below 0 c) weight 6.3g d ata gold-clad type range of low-level current voltage 500 100 50 10 5 2 1 4812 16 20 24 dc voltage (v) current (ma) all rights rese r v ed ? c opyright panasonic elect r ic w o r k s co., ltd. am5 3. operating characteristics pin plunger short hinge lever hinge lever long hinge lever simulated roller lever short roller lever roller lever 7th digit of part no. 34567 operating force, max. 0.49n 0.98n 1.96n 2.94n 3.92n release force, min. 0.12n 0.25n 0.49n 0.74n 0.98n pretravel, max. mm 1.4 movement differential, max. mm 0.4 overtravel, min. mm 1.0 operating position mm 14.7 0.4 7th digit of part no. 34567 operating force, max. 0.59n 1.08n 2.16n 3.14n 4.12n release force, min. 0.098n 0.20n 0.39n 0.59n 0.78n pretravel, max. mm 1.6 movement differential, max. mm 0.5 overtravel, min. mm 0.9 operating position mm 15.3 0.5 7th digit of part no. 34567 operating force, max. 0.29n 0.59n 1.18n 1.77n 2.35n release force, min. 0.049n 0.098n 0.20n 0.29n 0.39n pretravel, max. mm 3.2 movement differential, max. mm 1.0 overtravel, min. mm 1.4 operating position mm 15.3 1.0 7th digit of part no. 34567 operating force, max. 0.15n 0.29n 0.59n 0.88n 1.18n release force, min. 0.025n 0.049n 0.098n 0.15n 0.20n pretravel, max. mm 7.5 movement differential, max. mm 2.0 overtravel, min. mm 2.2 operating position mm 15.3 2.6 7th digit of part no. 34567 operating force, max. 0.29n 0.59n 1.18n 1.77n 2.35n release force, min. 0.049n 0.098n 0.20n 0.29n 0.39n pretravel, max. mm 3.2 movement differential, max. mm 1.0 overtravel, min. mm 1.4 operating position mm 18.5 1.0 7th digit of part no. 34567 operating force, max. 0.59n 1.08n 2.16n 3.14n 4.12n release force, min. 0.098n 0.20n 0.39n 0.59n 0.78n pretravel, max. mm 1.6 movement differential, max. mm 0.5 overtravel, min. mm 0.9 operating position mm 20.7 0.5 7th digit of part no. 34567 operating force, max. 0.29n 0.59n 1.18n 1.77n 2.35n release force, min. 0.049n 0.098n 0.20n 0.29n 0.39n pretravel, max. mm 3.2 movement differential, max. mm 1.0 overtravel, min. mm 1.4 operating position mm 20.7 1.0 all rights rese r v ed ? c opyright panasonic elect r ic w o r k s co., ltd. am5 dimensions mm general tolerance: 0.25 the dimensions other than drawn above are same as pin plunger type. 1. pin plunger bottom com terminal .187 quick-connect terminal .250 quick-connect terminal ( p.t. ) 1.4 max. 10.3 3.95 39.45 ?.05 +0.25 3.1 13.5 3.4 22.2 2.8 1.8 27.8 20.2 2.8 c no nc 1 3 2 0.15 0.1 3.2 6.35 1.55 dia. 6.4 4.75 3.1 dia. +0.25 ?.05 5.65 6.5 6.65 9.3 4.1 0.5 2.8 10.3 0.1 15.9 14.7 ( o.p. ) 0.4 12 42.7 3.4 22.2 2.8 1.8 27.8 20.2 2.8 c no nc 1 3 2 0.15 0.1 1 2 -0.05 +0.1 8.05 4.15 ?.07 +0.05 6.35 0.15 ( p.t. ) 1.4 max. 10.3 3.95 ?.05 +0.25 3.1 2.8 10.3 0.1 15.9 14.7 ( o.p. ) 0.4 3.1 dia. +0.25 ?.05 1.65 dia. +0.1 0 3.64.1 0.8 9.3 9.7 10.6 side com terminal .187 quick-connect terminal .250 quick-connect terminal c no nc 1 3 2 ( p.t. ) 1.4 max. 10.3 3.95 39.45 ?.05 +0.25 3.1 3.4 22.2 2.8 1.8 27.8 20.2 2.8 0.15 0.1 3.2 6.35 1.55 dia. 6.4 4.75 3.1 dia. +0.25 ?.05 5.65 6.5 6 9.3 4.1 0.5 2.8 10.3 0.1 15.9 14.7 ( o.p. ) 0.4 c no nc 1 3 2 10.3 3.95 42.7 3.4 22.2 2.8 1.8 27.8 20.2 2.8 0.15 0.1 2 -0.05 +0.1 8.05 4.15 ?.07 +0.05 6.35 0.15 ( p.t. ) 1.4 max. ?.05 +0.25 3.1 2.8 10.3 0.1 15.9 14.7 ( o.p. ) 0.4 3.1 dia. +0.25 ?.05 1.65 dia. +0.1 0 3.64.1 0.8 9.3 9.8 10.6 2. short hinge lever 27.8 20.2 c no nc 1 3 2 22.1 0.5 ( p.t. ) 1.6 max. 10.3 5.0 39.45 ?.05 +0.25 3.1 13.5 3.4 22.2 2.8 1.8 0.15 0.1 3.2 6.35 1.55 dia. 6.4 4.75 3.1 dia. +0.25 ?.05 5.65 6.5 6.65 9.3 4.1 0.5 2.8 10.3 0.1 15.9 15.3 ( o.p. ) 0.5 all rights rese r v ed ? c opyright panasonic elect r ic w o r k s co., ltd. am5 the dimensions other than drawn above are same as pin plunger type. the dimensions other than drawn above are same as pin plunger type. the dimensions other than drawn above are same as pin plunger type. 3. hinge lever 27.8 20.2 c no nc 1 3 2 35.8 0.5 ( p.t. ) 3.2 max. 10.3 5.0 39.45 ?.05 +0.25 3.1 13.5 3.4 22.2 2.8 1.8 0.15 0.1 3.2 6.35 1.55 dia. 6.4 4.75 3.1 dia. +0.25 ?.05 5.65 6.5 6.65 9.3 4.1 0.5 2.8 10.3 0.1 15.9 14.3 ( o.p. ) 1.0 mm general tolerance: 0.25 4. long hinge lever 27.8 20.2 c no nc 1 3 2 59.5 0.5 ( p.t. ) 7.5 max. 10.3 5.0 39.45 ?.05 +0.25 3.1 13.5 3.4 22.2 2.8 1.8 0.15 0.1 3.2 6.35 1.55 dia. 6.4 4.75 3.1 dia. +0.25 ?.05 5.65 6.5 6.65 9.3 4.1 0.5 2.8 10.3 0.1 15.9 15.3 ( o.p. ) 2.6 5. simulated roller lever r3 27.8 c no nc 1 3 2 32.8 0.5 ( p.t. ) 3.2 max. 10.3 5.0 39.45 ?.05 +0.25 3.1 13.5 3.4 22.2 2.8 1.8 0.15 0.1 3.2 6.35 1.55 dia. 6.4 4.75 3.1 dia. +0.25 ?.05 5.65 6.5 6.65 9.3 4.1 0.5 2.8 10.3 0.1 15.9 18.5 ( o.p. ) 1.0 20.2 all rights rese r v ed ? c opyright panasonic elect r ic w o r k s co., ltd. am5 the dimensions other than drawn above are same as pin plunger type. the dimensions other than drawn above are same as pin plunger type. 6. short roller lever 27.8 20.2 c no nc 1 3 2 20.6 0.5 ( p.t. ) 1.6 max. 10.3 4.9 4.8 39.45 ?.05 +0.25 3.1 13.5 3.4 22.2 2.8 1.8 0.15 0.1 3.2 6.35 1.55 dia. 6.4 4.75 3.1 dia. +0.25 ?.05 5.65 6.5 6.65 9.3 4.1 0.5 2.8 10.3 0.1 15.9 20.7 ( o.p. ) 0.5 mm general tolerance: 0.25 7. hinge roller lever c no nc 1 3 2 34.2 0.5 27.8 20.2 ( p.t. ) 3.2 max. 10.3 4.9 4.8 39.45 ?.05 +0.25 3.1 13.5 3.4 22.2 2.8 1.8 0.15 0.1 3.2 6.35 1.55 dia. 6.4 4.75 3.1 dia. +0.25 ?.05 5.65 6.5 6.65 9.3 4.1 0.5 2.8 10.3 0.1 15.9 20.7 ( o.p. ) 1.0 all rights rese r v ed ? c opyright panasonic elect r ic w o r k s co., ltd. am5 notes 1. fastening of the switch body 1) use ?t ?ister head m3 screws to mount switches with less than a 0.49 n? torque. use of screws washers or adhesive lock is recommended to prevent loosening of the screws. 2) check insulation distance between ground and each terminal. 3) when the operation object is in the free position, force should not be applied directly to the actuator or pin plunger. also force should be applied to the pin plunger from vertical direction to the switch. 4) the standard value of overtravel should be the range of 70% to 100% of the rated o.t. value. 2. soldering operations soldering should be accomplished in less than 5 seconds, with a 60 watt iron. care should be taken not to apply force to the terminal during soldering. 3. varience of operating characteristics when specifying the switch, allow +20% to the listed operating and release forces. 4. environment av oid using the switches in the following conditions; ?in corrosive gases, such as silicon gas ?in a dusty environment 5. for switching of inductive loads (relays, solenoids, etc.) 1) in order to prevent damage to contacts due to the occurrence of arcing, an arc absorbing circuit should be applied. 2) care should be taken that occurrence in ac load possibly shorten the expected life. 6. please assure the quality and reliability of the switch under the actual service condition. 7. it is recommended to use gold clad contact type in use of low-level circuit rating. 8. cover and body are press-?ted. once it is taken apart, it may cause change of characteristics. 9. cover and body are press-?ted. once it is taken apart, it may cause change of characteristics. use of connector the .187 quick-connect terminal and .250 quick-connect terminal accept the all kinds of 1 polarity connectors and the ?ositive lock connectors please contact the manufacturers directly. ?receptacle terminal .250 series .187 series ??ositive lock connector. (equipped with the lock construction of low insertion type) .187 type (1 polarity) .250 type (1 polarity) .187 type (2 polarities) .187 type (3 polarities) all rights rese r v ed ? c opyright panasonic elect r ic w o r k s co., ltd. |
Price & Availability of AM51646C63N |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |